###################################################################### #x w# #x X and W commands list w# #x -= Version 4.1 =- w# #x Jan, 1999 w# #x w# ###################################################################### Notes : 1. means that the variable is mandatory 2. [variable] means that the variable is optional and can be omitted 3. a|b means "a or b" ---------------------------------------------------------------------- Level 500 : => Channel Manager SET : syntax - /msg X,W set #channel : Changes special X/W modes for channel. See more settings in the level 450. Variables for SET : FloodPro : The maximum number of KICKs, TOPIC CHANGES and such that can be sent to the channel in a 15 second period. Any user exceeding this limit will be kicked and suspended (if on the userlist). NOTE : This does NOT work against normal channel dialogue, since X/W are +d (deaf) to all channel text. NoOp : In this mode X/W will deop EVERYONE. Making them the only op in the channel. However, users may still access commands though X/W. OpOnly : Make op the only chanop command available though X/W. Also, you can ONLY op yourself. NOTE : This does NOT prevent someone with ops in the channel from exercising op commands themselves. StrictOp : In this mode only people on the userlist with access equal or greater than 100 may have ops. If they are on the list, they must send their password before they are allowed ops. Lang : Changes default language for the channel. The supported languages are: en (english) nl (dutch) fr (francais) ge (deutsch) ---------------------------------------------------------------------- Level 450 => Trusted channel admin. SET : syntax - /msg X,W set #channel : Changes special X/W modes for channel. See more settings in the level 500. Variables for SET : AlwaysOp : This variable insures that X/W will always have ops. They will op themselves if needed. UserFlags : Set's default user settings that will be given to a new user on the channel. Default value is 0 0 = AUTOOP OFF for new users 1 = AUTOOP ON for new users MassDeopPro : The maximum number of deops X will allow in a 15 sec period. Any user exceeding this will be DeOped and Suspended (if on the userlist). NickFloodPro : The maximum number of nick changes that can be done in the channel in a 15 sec period. Any user exceeding this number will be kicked from the channel and suspended (if on the userlist). NOTE : this variable is now obsolete, since the Undernet server will not allow rapid nick changes. Description : Sets the default channel topic. This is used to set the autotopic is ON. This does NOT affect the actual channel topic if autotopic is off. The topic can also be seen in the chaninfo or the webpage. Example: /msg X set #channel description The UnderNet Chat Channel. URL : Sets the default channel URL. This can be seen from the chaninfo, or the webpage. It is also used to set the topic if autotopic is ON. Example: /msg X set #channel URL http://cservice.undernet.org AutoTopic : This flag makes X or W reset the topic to the channel URL and Descrition every 30 minutes. Note that if the channel is idle, the topic will not be reset during that time. Example: /msg X set #channel AutoTopic ON Addchan : syntax - /msg X,W addchan <#channel> : Adds the channel to X/W's database and sets channel default modes. If you do not use this command after you join X/W to your channel they will not rejoin after a restart. Join : syntax - /msg X,W join <#channel> : Tells X/W to join your channel. Important: see Addchan Part : syntax - /msg X,W part <#channel> : Tells X/W to part your channel. Remchan : syntax - /msg X,W remchan <#channel> : Removes your channel defaults from X/W's database. Useful when you want to change default modes. This is NOT the same as a purge of your channel. X/W will not rejoin unless you send addchan again after this. ---------------------------------------------------------------------- Level 400 => Userlist Admin Adduser : syntax - /msg X@channels.undernet.org adduser #channel [user@host] or /msg W@channels2.undernet.org adduser #channel [user@host] Adds a user to your channel's database with the given access level and password. The password field is mandatory. If the person is online user@host can be left out, (X/W will look it up themselves). You can only add people with access lower than yours. Clearmode : syntax - /msg X,W clearmode <#channel> : Clears all channel modes. Remember that if your channel has been locked up (set +i or +k without your knowledge) the best option is to use invite and status, because a take over bot can reset the modes if you use clearmode. Modinfo : syntax - /msg X,W modinfo <#channel> : Changes a user's access settings Variables for Modinfo : ACCESS : Changes the access level of a user, possible values are 1 to (1 level below yours). So if you are 400, you can give up to 399 access. AUTOOP : Changes autoop from ON to OFF. Autoop means that X/W will op the user when they enter the channel. MATCH : Changes the user@host for a user in X/W's database. Useful if a user on your channel has changed ISP's Example : /msg X modinfo #somechannel MATCH someuser blah@blah PASSWORD : Changes a users password. Remember that the command to change your own password is newpass (level 0 command). Remuser : syntax - /msg X,W remuser <#channel> : Removes a user from the channel database. You must have higher access than the user you want to remove. Status : syntax - /msg X,W status <#channel> : Displays all special X/W modes, Channel modes and the number of users in your channel. Very useful to check channel keys :) ---------------------------------------------------------------------- Level 200 => Senior channel operator Mask kick: syntax - /msg X,W kick <#channel> *!*username@*.mask [reason] Kicks everyone using this mask. The reason is optional. Your name will be placed in the kick msg. ---------------------------------------------------------------------- Level 100 => Channel operator Deop : syntax - /msg X,W deop <#channel> [nick2] [nick3] .... : Deops one or more persons in you channel. Invite : syntax - /msg X,W invite <#channel> : Has X invite someone in your channel. You can't use this command to mass invite but it's very useful if your channel is +i (invite only). Note also that a invite override the channel modes +l (channel limit) and +b (ban). But X,W will ever kick someone in its ban list even if invited. Op : syntax - /msg X,W op <#channel> [nick2] [nick3] .... : Ops one or more persons in your channel Suspend : syntax - /msg X,W suspend <#channel> : Suspends a users access to X/W for the specified period of time. s(econds) , m(inutes), h(ours) or d(ays). You can only suspend someone with access lower than yours. Example: /msg X suspend #my_channel Op_nick 3 d Unsuspend : syntax - /msg X,W unsuspend <#channel> : Unsuspends a user on your access list. ---------------------------------------------------------------------- Level 75 => New channel operator Ban : syntax - /msg X,W ban <#channel> [duration in hours] [level] [reason] : Bans a person on X/W's list for a specific number of hours. The max is 336, 2 weeks. You use the person's nick if they are online. or specify a user@host if they are not. Level can be from 1 to your access level. A level 20 - 74 ban prevents the user from having ops. 75+ keeps them from being in the channel at all. You must at least have the same access level as the level of the ban to remove it. Unban : syntax - /msg X,W unban <#channel> : Unbans a person from your channel. By nick if they are online, or by user@host if they are not, as with ban. Also, removes any matching bans on X/W's banlist, so if you are banned and don't know the mask banned just use your nick to unban any mask matching yours. ---------------------------------------------------------------------- Level 50 => Channel regular Kick : syntax - /msg X,W kick <#channel> [reason] : Tells X/W to kick somone from your channel, The reason is optional. Your name will be placed in the kick msg. Topic : syntax - /msg X,W topic <#channel> : Changes the topic in your channel. ---------------------------------------------------------------------- Level 1 => *shrug* Status: syntax - /msg X,W status <#channel> : This does the same thing as level 400 status EXCEPT it will not report channel modes (+nt ect) to anyone with access below 400. ---------------------------------------------------------------------- Level 0 => Everyone else Access : syntax - /msg X,W access <#channel> [options] : Can look up the access for a certain person or a string. Expl : /msg X,W access #channel *!*@*.gnn.com , would return all GNN users with access on that channel. Also you can use these options instead of a nick or string. If the list has more than 15 entries check the Channel Service web site. Access options -min level - show only users above the given level -max level - show only users below the given level -autoop - Show only users with autoop on. -noautoop - Show only users with autoop off. -modif - Shows who last modified the access listing End of Access options Access Flags : - output of access command -X- USER: Blahguy- (*!*username@*.blah.com) ACCESS: 1 LMPU -X- CHANNEL: #cservice -- AUTOOP: ON M = Modified, but not saved to disk, database is autosaved every 90 minutes. P = Has a password U = User is currently authenticated L = Loaded in memory, An access remains listed in memory for 90 minutes after you log off. Banlist : syntax - /msg X,W banlist <#channel> : Shows the channel banlist. You must be in the channel to use this command. Chaninfo : syntax - /msg X,W chaninfo <#channel> : Displays whether or not a channel is registered, to whom, and if set, channel description and URL. Deauth : syntax - /msg X,W deauth <#channel> : If you have sent you password already and would like to deauthenticate yourself. Use this command. Help : syntax - /msg X,W help [command] : Displays help file on a given command. Lbanlist : syntax - /msg X,W lbanlist <#channel> : Searches X/W's banlist for a certain string. You need to be in the channel to use this command. Use * to see the whole list. If the list has more than 15 entries check the Channel Service web site. Login : syntax - /msg x@channels.undernet.org login <#channel> - for X /msg w@channels2.undernet.org login <#channel> - for W This loads your access listing into memory and authenticates you on your channel. Note : Exact same as pass Map : syntax - /msg X,W map : Shows a map of connected servers. Motd : syntax - /msg X,W motd : Displays X/W's message of the day. Newpass : syntax - /msg newpass <#channel> : Sets a password on a channel for X/W. If it is X send to X@channels.undernet.org. If it is W send to W@channels2.undernet.org. Pass : syntax - /msg pass <#channel> See Login Showcommands : syntax - /msg X,W showcommands [#channel] : Shows all commands you can use on a channel. Showignore : syntax - /msg X,W showignore : Shows X/W's ignore list. This is what happens when someone tries to or accidentally floods X/W. The time length is 60 minutes. Verify : syntax - /msg X,W verify : Displays whether or not a person is an official cservice rep. If X/W answers that the person is "NOT an authenticated CSERVICE representative" please come to #cservice and ask about them. ------------------------------------------------------------------------------ This doc was originally written by Manning. E-mail: manning@undernet.org Last review by Goncalves (Jan, 1999) This doc is maintained by CService helpers and admins E-mail cservice@undernet.org with any suggestions